Contact us

IOT based Home Automation Over the Cloud

IOT based Home Automation Over the cloud

Short Description :-

Abstract:

The main purpose of this IOT Based Home automation project is to control any load through the Internet network over cloud. It works  remotely on the basic principle of the Internet of things (IOT). For this real-time scenario we use webpage with user configurab

le front end to control and monitor the load. The data sent from from a password protected webpage returns commands through allotted IP fed to it. A Wi-Fi Module is configured with any nearby wireless modem to access internet.  The  received internet commands are fed to the Wi-Fi module. The program w

ithin the Wi-Fi Module execute the received commands based on which the load  gets activated through TRIAC and Opto-coupler interfaced to Wi-Fi Module. The status of the load also will be displayed on the web page.

Here in this project program in written within the Wi-Fi module, No extra microcontroller has been used to drive the load.

The power supply consists of 5V SMPS board and 3.

3V voltage regulator for a Wi-Fi module. 5V SMPS board will give 5V DC out from 230V AC, this we fed to 3.3V voltage regulator which supply power to Wi-Fi module and remaining circuit.

Block Diagram:

Leave a Reply

Your email address will not be published. Required fields are marked *

Message us
Thanks for signing up. You must confirm your email address before we can send you. Please check your email and follow the instructions.
We respect your privacy. Your information is safe and will never be shared.
Don't miss out. Subscribe today.
×
×
WordPress Popup Plugin